Restoring Old Victorian Tiles at a Public House

Here’s a really interesting commercial job for you, which I recently completed in the town of Hinckley, Leicestershire. I was asked to take a look at a Victorian Geometric and Encaustic tiled floor in the historic Queen’s Head pub.

This floor is over a century old and although in good condition for its age had suffered significant wear over the years, along with some cracked tiles and slight inherent moisture issues. What the pub landlord requested was a restorative clean to alleviate the aesthetically damaging effect of the wear, and to enhance the natural colours of the stone. I was also asked to seal the floor following the clean to achieve a semi-gloss finish.

Victorian Tiled Public House Floor Before Cleaning in Hinckley

Cleaning an old Victorian tiled floor

The first step in the cleaning process was to mix a strong solution of one part Tile Doctor Pro-Clean to four parts clean water. Pro-Clean is a high alkaline cleaner which also contains stripping properties, allowing it to break down old sealer and tackle heavy soil build-up. The solution was applied to the floor and left to dwell for 15 minutes, giving it times to seep into the stone, get underneath the dirt and lift it to the surface.

I addressed several paint spots and areas suffering from glue contamination by using Tile Doctor Remove & Go, which is specially formulated to break down paint and adhesives on unpolished natural stone floors, amongst others. The entire floor was then scrubbed using a special floor cleaning pad, and the resulting slurry was vacuumed away using a wet-vac machine.

The final issue to deal with was the inherent efflorescence staining. This was treated using Tile Doctor Grout Clean-Up, an acid-based product which removes not just efflorescence but also grout haze, mineral deposits, and rust stains. The solution here was one part Grout Clean-Up diluted with four parts water.

After completing the clean, I thoroughly rinsed the floor with clean water to remove any trace of cleaning product and dried the floor as much as possible with a wet vacuum, then before leaving for the day i installed a couple of air movers to assist with drying overnight.

Sealing an old Victorian tiled floor

Upon my return the following day, I checked the floor for any excess moisture before sealing it with our topical, semi-gloss finish sealer, known as Seal & Go Extra which due to its formula is ideal for external or old internal floors where there is unlikely to be damp from membrane.

This unique product provides excellent protection, and allows the tiles to breath where floors are suffering from inherent moisture issues. It is suitable for both internal and external use, on Victorian floor tiles, Sandstone, Flagstones, Terracotta, and rough Slate.

Victorian Tiled Public House Floor After Cleaning in Hinckley

As you can see from the photo, I was able to fulfil my client’s request to a high standard, bringing the pub’s old yet characterful Victorian tiled floor back to life again.
 
 
Source: Victorian Tile, Restoration, cleaning and sealing service in Leicestershire

Cleaning Anti-Slip Ceramic Tiles at a Car Dealership

At Tile Doctor, we carry out professional tiled floor restorations in both residential and commercial environments. In this particular case we were asked to take a look at the tiles at a Car Dealership in the town of Melton Mowbray, Leicestershire. Melton Mowbray is known as the “Rural Capital of Food”, thanks to its range of local specialities, including its famous pork pie and Stilton cheese.

The problem was focused in the toilet area, where the non-slip Ceramic tiles had suffered heavy soil build-up. Since the cleaning contractor was unable to tackle the issue, Tile Doctor was recruited to restore the area using specialist tile cleaning methods and products.

Cleaning non-slip Ceramic Tiles

Judging by the level of soil build-up on the floor I mixed a solution of one part Tile Doctor Pro-Clean (a high alkaline cleaner) with five parts of water. This was then left to dwell on the tiles so the solution could seep into the crevices of the non-slip tile breaking it down and making it easier to clean.

Non-Slip Ceramic Tile During Cleaning Melton Mowbray

I agitated the solution using scrubbing pads to remove the soil which once the dirty cleaning solution was rinsed away and removed using a wet vacuum made a dramatic difference to the overall appearance of the floor.

Removing Grout Smears from Ceramic Tiles

The floor looked much better however now it was clean I could see a film of grout haze residue on the surface of many of the tiles which had been left over from the initial installation. To tackle this problem I applied Tile Doctor Grout Clean-Up which along with grout haze this product can also remove rust stains and other mineral deposits.

I was now happy with the condition of the ceramic tile and grout and after another rinse with water I promptly force dried the floor with a special fan in order to get the toilet ready for use again. You only need to look at the before and after photos to see the difference!

Non-Slip Ceramic Tile After Cleaning Melton Mowbray

 
 
Source: Ceramic Tile and Grout cleaning and service in Leicestershire