New Build Travertine Clean for Construction Company

Details below of a newly laid Travertine Honed & Filled floor in Aylesbury that needed stripping and re-sealing. The work was done at the request of a building company who had just completed a pair of semi-detached houses laid with Travertine tiles on the ground floor. Unfortunately the tiling contractor had failed to clean the tile surface properly before sealing and had trapped particles of dust and debris into the sealer, as a result the whole floor was as rough as sandpaper and needed to be stripped and re-sealed prior to their clients moving in the following week.

Travertine Floor Aylesbury Before

Cleaning Travertine Tile

To remove the existing sealer and to polish the stone we used the Tile Doctor diamond burnishing system. This involves burnishing the floor with diamond encrusted pads fitted to a heavy rotary machine, the system consists of a set of four seventeen inch coloured pads and you work your way through the pads from red (sealer removal) through to green (final polishing). This work returned the stone to its original condition ready for sealing.

Travertine Floor Aylesbury After

Sealing Travertine Tile

We sealed the floor with three coats of Tile Doctor Colour Grow which provides excellent stain protection whilst enhancing the natural colours in the stone. The building company was pleased that we had managed to resolve the problem before the owners moved in as it had avoided an embarrassing situation for them. Interestingly we have since completed three other jobs with this same type of problem.
 
 
Source: New Build Travertine Tile Cleaning in Buckinghamshire

Cleaning Slate Tiles at a London Phone Retailer

Shop floors see a lot of foot traffic and this Slate Tiled floor installed in a mobile phone retail outlet Chapel Market, Islington was certainly no different resulting in the floor becoming dull and tired over time. Were happy to cover Residential and Commercial property however in this case we had to wait until the store had closed for the evening before we could get to work.

Cleaning the Slate Tiled Floor

The first step was to clear the floor of any moveable displays and anything we couldn’t move was covered in a plastic sheet to protect it from splashing. We then set about cleaning the slate tiled floor by applying Tile Doctor Pro-Clean diluted one part Pro-Clean to four parts water, this was left to dwell on the floor for a short while before working it into the floor with a rotary machine fitted with a black scrubbing pad. We used a grout brush to clean out the grout lines and then removed the soiled cleaning solution with a wet vacuum to see how it looked.

Slate Floor London Phone Shop Before

A quick inspection revealed more work was required, there were a few areas of ground in dirt and a stronger dilution of Pro-Clean was applied to clean these up, a number of these areas were proving stubborn so we mixed the Pro-Clean with NanoTech Ultra Clean which adds tiny abrasive particles to the cleaning agent which makes for a very effective cleaner.

The wet vacuum was brought in again to remove the soiled cleaning solution and we inspected the floor again. We were happy with the results so we rinsed the slate tile and grout down with clean water a number of tiles to wash away any remaining cleaning agents and neutralise the floor before sealing. A number of fan blowers were then switched on to help the floor dry and we took a break.

Sealing Slate Tiled Floor

Once the floor was dry we proceeded to seal it with Tile Doctor Seal and Go which provides good stain protection with a low sheen finish, slate is quite porous and it took five coats before it was fully sealed.

We managed to complete the job in a single evening and the shop manager was very pleased with the results.

Slate Floor London Phone Shop After

 
 
Source: Slate Tile Cleaning and Sealing in Islington